English
Why does paper matting rely on industrial chrome rollers?
02-17
/ 2025
Why does paper matting rely on industrial chrome rollers?
Compared with other types of rollers, industrial chrome-plated rollers can operate at higher speeds without affecting the matting effect of paper due to their excellent smoothness and wear resistance.
Why do some industrial rollers need chrome plating?
02-13
/ 2025
Why do some industrial rollers need chrome plating?
Industrial rollers are subject to a lot of friction during daily operation, and the roller surface is prone to wear, especially under high-speed or long-term operation conditions. The chrome plating layer can significantly improve the wear resistance of the roller due to its excellent hardness (usually between 800-1200 HV).
What will dissolve the chrome coating on industrial chrome rollers?
01-23
/ 2025
What will dissolve the chrome coating on industrial chrome rollers?
Hydrochloric acid is a strong acid and is highly corrosive. Although the chromium oxide layer can resist the erosion of hydrochloric acid to a certain extent, under conditions of high concentration and high temperature, hydrochloric acid can effectively dissolve the chromium metal and its oxide layer, causing damage to the chrome plating layer.
Will the chrome coating of industrial chrome rollers fade?
01-03
/ 2025
Will the chrome coating of industrial chrome rollers fade?
In theory, the chrome layer will not fade under most working conditions. The stability of chrome metal itself is extremely high, and the chromium oxide layer on its surface can effectively prevent the external environment from corroding the chrome layer. Therefore, the chrome layer can usually maintain its original luster and color for a long time and is not easy to fade.
What is the hardness of the chrome coating of industrial chrome rollers?
12-10
/ 2024
What is the hardness of the chrome coating of industrial chrome rollers?
The hardness of the chrome plating layer of industrial chrome-plated rollers is usually between 800 and 1000 Vickers hardness (HV). This hardness range depends on the specific conditions of the chrome plating process, including current density, temperature, plating solution composition, etc.
Chrome Rollers vs. Rubber Laminated Rollers: What's the Difference?
10-11
/ 2024
Chrome Rollers vs. Rubber Laminated Rollers: What's the Difference?
chrome-plated rollers are suitable for high-precision, high-load applications due to their high hardness, wear resistance and corrosion resistance, while rubber-laminated rollers are widely used in environments sensitive to surface pressure due to their softness, elasticity and material protection.
How to check the thickness of the chrome coating on chrome rollers?
10-09
/ 2024
How to check the thickness of the chrome coating on chrome rollers?
There are many methods for checking the thickness of chrome plating, which can be divided into two categories: non-destructive testing and destructive testing according to different equipment and occasions.
What is the process sequence of chrome-plated rollers?
09-20
/ 2024
What is the process sequence of chrome-plated rollers?
The process sequence of chrome-plated rollers: Raw material preparation Roller body processing 1. Rough processing 2. Finishing 3. Heat treatment Pretreatment 1. Cleaning 2. Pickling 3. Activation Electroplating process 1. Electroplating equipment preparation 2. Chrome plating solution preparation
How many layers of chrome do industrial chrome rollers need?
09-19
/ 2024
How many layers of chrome do industrial chrome rollers need?
Usually, industrial chrome-plated rollers are plated with a layer of chrome, and the thickness is adjusted according to the use requirements. Single-layer chrome plating can already provide quite strong wear resistance and corrosion resistance, which is suitable for most industrial applications.
Will the chrome layer of industrial chrome-plated rollers crack?
09-16
/ 2024
Will the chrome layer of industrial chrome-plated rollers crack?
During the electroplating process, if the thickness of the chrome layer is uneven, the weak part will become a stress concentration point, which is prone to cracks during use. This situation is particularly common at the edges or concave and convex parts of the roller.
Get the latest price? We'll respond as soon as possible(within 12 hours)
MENU
LANGUAGE